Electronics · IoT · Embedded Systems

Build the physical
world, one board
at a time.

A working index of firmware, power electronics and full-stack embedded projects — with the exact components you need and a realistic estimate of what each build costs.

— Projects indexed
— Line items in BOMs
— Cost range per build
3 Source blueprints
01 / Catalogue

Project index

Filters, search and cost breakdowns for every build across the three blueprints.

How prices work
—
02 / Procurement

Vol. 2 shopping list

The consolidated incremental shopping list from the field-project blueprint — quoted directly, in INR.

Open source PDF
ComponentQtyEst. INRTarget project

Qty 1–2 means a second ESP32-CAM is optional (one per CCTV node and one for the rover). Shared items appear once in this list but are reused across the projects noted in the last column.

03 / Foundations

Core lab kit

The master hardware list from Vol. 1. Most projects pull from this shared bench stock.

Open source PDF
03b / Bench setup

Prerequisite tools

What you need on the bench before starting — instruments, hand tools, safety gear and the software toolchain.

Price notes
MINIMUM VIABLE BENCH

A multimeter, temperature-controlled iron, consumables and hand tools come to roughly ₹2,500 – ₹5,000. Add an oscilloscope before starting any of the measurement-heavy or 220V AC builds.

04 / Field notes

From the blog

Short technical write-ups on power, isolation, RF and the mistakes worth avoiding.

Visit the blog
05 / Fine print

How to read this site

01

Prices & currency

All figures are approximate Indian rupees (₹). Only the Vol. 2 shopping list has prices quoted in the source documents; those are marked listed. Everything else is an indicative retail estimate based on common Indian component pricing.

02

Shared components

The core lab kit is reused across projects, so a project's estimate is the cost of the parts on that bench, not the cost of buying a whole new lab. Where a component is shared, its price appears in more than one project.

03

Flagship variance

Vol. 3 builds use custom 4-layer PCBs and single-board computers, so their totals swing widely with sourcing choices. The PCB line assumes ~₹1,500–₹3,000 for five fabricated boards. Treat these as order-of-magnitude budgets.

!

Mains safety

Projects touching 220V AC (Vol. 2 #3, Vol. 3 #2) require ≥6 mm creepage, a fuse + MOV on the AC line, an isolated supply such as the HLK-PM01, and a flame-retardant enclosure. Work de-energised and verify with a multimeter before touching anything.

Source blueprints